Skip to main content

IDEA-SysTec

Information

Everything you should know beforehand.

Who we are, how our frame system works, how to measure your shelving correctly, which boxes fit, how ordering and installation work — and what to watch out for regarding safety. All information is taken unchanged from our own product pages.

1 · Company

The IDEA — the original since 2004

For over two decades IDEA-SysTec has manufactured storage systems for the rear garage and the storage space of motorhomes — Made in Germany, from Neuhausen auf den Fildern near Stuttgart, conveniently located on the A8 between Stuttgart and Esslingen.

The first shelving systems were installed in Concorde motorhomes as early as 2000 — initially for private purposes. The specially developed frame system with angle profiles has been in use since 2001. In 2004 it became an independent company: „The ORIGINAL since 2004.” 2026 accordingly marks the 22nd year of shelf building.

The name says it all

IIndividual
DDeliberate
EExceptional
AAccessible

Made to measure without sawing or drilling

All parts are made to measure — no sawing and no drilling. The shelving units are supplied as a kit and can easily be installed yourself: as a rule the shelf is screwed together outside the vehicle, then folded up a little like a ship in a bottle, pushed through the rear garage door and set upright again inside the vehicle.

The IDEA system shelves can bear several kilos of weight; most boxes can be loaded with 10 to 20 kilograms be loaded. Even complicated ceiling constructions, for example on Adria or Mooveo, are no problem — and anyone wanting to save weight can still get simple frames without telescopic rails.

2 · Origin

Who invented it?

After more than 20 years on the market and over 40 known competitors, IDEA-SysTec holds its own through quality and service. The advertising slogan „Who invented it?” is well known — but the IDEA system shelf does not come from a herbal-sweet manufacturer. The idea arose in autumn 2000, initially for entirely private purposes. The first systems were installed in Concorde motorhomes from 2000; in 2004 an IDEA shelf was fitted in an extremely sturdy form in a customer vehicle for the first time.

The frame system was developed by Peter Wuttke. It is found only at IDEA-SysTec and was registered for utility-model protection — a registered commercial intellectual-property application, not a mere advertising promise.

There are a number of suppliers who now describe a similar shelving system as new, original or even unique. A former sales partner has also adopted key basic ideas and today offers a similar system. The aim from the outset was that every customer can assemble and install the shelf themselves even without craftsmanship skills — for example, by not laboriously lifting heavily loaded boxes but conveniently sliding them in.

IDEA-SysTec is supported by some of the best-known motorhome manufacturers — currently Carthago and Concorde, whose management at the time repeatedly had its own exhibition vehicles fitted with the IDEA shelving system, without any financial interest on the manufacturers’ part. The cooperation with Morelo ended in 2019 after ten years: the manufacturer chose a different supplier.

For a similar reason, the public sketchbook with the technical designs was also taken offline years ago, after competitors had helped themselves to it — by the company’s own account the result of 17 years of development, planning and sketching effort.

3 · Technology

How the IDEA system shelf works

Frame system with angle profiles

The boxes run in specially developed frames with sturdy side guidance. Instead of square profiles, IDEA-SysTec relies on angle profiles: they prevent the boxes from jamming when pulled out and pushed in. Aluminium angles serve as the running rail, giving the boxes double side support — even slightly tilted, a box does not slip off to the left or right, not even over a bump in the floor. The boxes therefore normally do not need to be secured additionally.

The principle is made possible by stackable boxes with a recessed all-round edge on the underside, which lock into place when stacked. To remove items, a box can be pulled out approx. 30–40 % and left standing hands-free; before setting off it must be pushed fully back in again.

Telescopic rails and safety locking

For pull-outs, IDEA-SysTec uses exclusively telescopic rails with high load capacity and automatic, two-sided locking — certified to TS 16949, the quality standard of the automotive industry. The profiles are cold-rolled and corrosion-resistantly coated in an electroplating plant; the manufacturer guarantees 72 hours salt-spray test, whereas many other suppliers only reach 1 hour.

When extending, the middle of the three profiles moves out first, so that the load does not rest solely on the inner, smallest profile from the start — this extends the service life of the rail. A 40 cm wide pull-out level can bear 140 kg.

All pull-outs have a lock-in/lock-out safety catch: they lock both in the pushed-in and in the pulled-out position, so that nothing is torn out of the anchoring during an emergency stop. To release, levers at both ends of the rail or the practical one-hand release must be operated.

Turn latches, cam locks and other manual fasteners are deliberately not used at IDEA-SysTec: a standard metal turn latch holds a maximum of 450 N — equivalent to 45 kg — far too little for pull-outs with a 90 kg load capacity per level.

Adjusting plates and fastening

The shelf supports are usually not screwed to the vehicle, but braced against the sturdy ceiling via adjustable adjusting plates — the system acts like a cube and therefore normally does not tip over. With a thin or unstable ceiling, IDEA-SysTec recommends additional cross-bracing via two cross members on the outer supports, alternatively fastening to existing lashing rails.

Further quality features

Compared with many other shelving systems on the market:

  • · Thread milled in at the top for a firmer hold
  • · Ground, deburred aluminium profiles
  • · 4 cm contact surface on the supports for stable side support
  • · No inner brackets with grub screws or zinc die-cast — these can break under high load; instead T-slot nuts and screws
  • · Plastic end caps at the bottom, so the lowest frame reaches down to the floor
  • · Subsequent mounting of accessories possible thanks to special T-slot nuts

4 · Dimensions

Size calculation for an IDEA shelf

For each box, some space must be reserved for insertion — both in width and in height — plus additional space for the supports.

Height

So that a box can be pulled out of the compartment comfortably, a clearance above the box of approx. 3 cm should be factored in. For the frame on which the box locks in place, another 2 cm is needed.

So in total, in terms of height, 5 cm to each box height is added. For shelves with telescopic pull-outs, more space must be added in height and width.

Width — single frame

1 cm per box, plus 2 cm for each support.

Suppose 2 AUER boxes with a box width of 40 cm are placed side by side in a shelf, and a support is to stand between each box:

2 × 40 cmBoxes80 cm
+ 2 × 1 cmInsertion area82 cm
+ 3 × 2 cmSupports88 cm
Shelf width88 cm

With the Double frame the same formula applies — only with one support fewer, because two boxes are inserted between two supports (in the example above: 80 cm + 2 cm + 2 × 2 cm = 86 cm). Important: if a double frame or a combination of double and 60-cm frame is required, this must be explicitly stated when ordering.

In the configurator we calculate this for you — Enter dimensions.

Depth — lengthwise or crosswise insertion

InsertionDepth of the box (40 × 30 cm)
Lengthwise insertion (along the length)41 cm
Crosswise insertion (broadside)31 cm

Note on the extra allowance for telescopic pull-outs

Shelves with telescopic pull-outs require additional space in height and width. The figures for this differ depending on the system: in several places there is mention of +4 cm additional width, elsewhere — for trio/quadro pull-outs in the rear garage — of +9 cm. These values are not interchangeable. Depending on the system — if in doubt, please ask specifically when ordering.

5 · Boxes

Euro-standard boxes

You have the full choice with 5 different heights and 3 box sizes from the company AUER (industrial quality).

Euro-standard boxes from AUER in the IDEA-SysTec frame system

Why only AUER

We only use boxes of the AUER brand. In the DIY stores you now find new boxes from other suppliers every six months, so we cannot say whether they fit our system. In some cases the small boxes are from a different company than the large boxes. That’s no fun anymore.

Properties

Extremely sturdy plastic containers, also suitable for heavy items. Cold- and heat-resistant, and thanks to the all-round edge at the bottom especially smooth-running in our frame system.

Due to the raw materials, colour variations are unavoidable. Currently only various shades of grey in stock.

Which boxes fit — and which don’t

CompatibleNot compatible
AUER (reference), Rako, AluTec, OBI Surplus, Ringoplast, Boxen-Welt/TauroWibo Box (Hornbach/Hagebaumarkt), OKT Robusto (now „keeeper”)

Transparent boxes (e.g. OBI Tauro/Surplus, OKT, Heidrun, GIES) are made of thin, hard plastic and have been removed from the range — edges break off more easily, and floor breakages have also been reported. Bauhaus and Hornbach carry different box suppliers depending on the region — a blanket compatibility statement „Bauhaus” or „Hornbach” is therefore not enough; if in doubt, please ask specifically.

Caution with new Euro-standard boxes

There are now Euro-standard boxes that have a different shape at the bottom and therefore no longer in the same way fit into the frame system as the classic AUER boxes with all-round edge. Please obtain boxes directly from IDEA-SysTec where possible, or check compatibility before buying at a DIY store/online shop.

Lengthwise and crosswise insertion

When standing in front of the shelf, the boxes are placed either the long way (lengthwise) or with the broad side (crosswise). Frame types are accordingly available in lengthwise or crosswise insertion.

6 · Process

Ordering & installation times

The ordering process is handled personally: no shop sales, no showroom. Visits only by appointment. You send dimensions, photos and vehicle make to info@idearegale.de — larger files preferably via WeTransfer or WhatsApp (0176 — 46734175). IDEA-SysTec creates a dimensioned sketch from this, which you approve; after that it is manufactured and shipped.

Since IDEA-SysTec does not manufacture for stock but makes each shelf individually, drawing up a proposal takes 2–3 days for simple enquiries, up to 3–5 days for more complex ones. Without exact dimensions of the storage space (height, width, depth) no size can be determined — stating the model and year of manufacture alone is not enough, since the same motorhome type can have different storage spaces.

Guide value for assembly and installation time

Every motorhome is different, so the assembly and installation time can only be a guide value, derived from recent years. If extreme installation situations arise, the values may change.

ProductTime
Pedi-Packer~2 hrs
Shelving system V5-2, double shelf 3–4 levels~2–3 hrs
Shelving system V5-22, double shelf 3–4 levels~3–4 hrs
VCT-75 camping frame~2 hrs
VCT-140 camping frame, large~2–3 hrs
Underfloor pull-out system~3–3,5 hrs (depending on installation situation)
Double-deck pull-out~3–3,5 hrs
Trio pull-out~4 hrs
Cross supports (2 pcs)~1 hr

Mounting of accessories and small parts is not yet included here.

Why there are no flat-rate prices

Flat-rate prices for installations, without having seen the vehicle, always mean that either the customer or the dealer „loses money” — and that is pleasant for neither of them. For a legally binding installation quote, the vehicle is therefore needed on site.

There is one exception: Pedi-Packer-S, -V and -MT are installed at a fixed price of 99,50 € fitted (assembly and installation without configuration changes, labour only — goods and accessories not included).

Consultation, appointments, shipping

On-site consultation is free for 60 minutes. For more complicated consultation an effort-based price applies. Collection, consultation appointments and delivery are only possible by arrangement.

Shipping is normally within 3–5 days; at the start of the season between January and June, expect 4–5 days from receipt of order, correspondingly longer for elaborate projects. On-site installation in Neuhausen usually takes place on a single day.

Shipping methodCost (Germany)
Small parts / accessories8,00 €
Standard parcel (up to 1,75 m length, up to 30 kg)19,00 €
Boxes, depending on volume15,00–25,00 €
XL parcels from 110 cm length29,00 €

Delivery also to the EU and to Switzerland — costs and handling on request. For Swiss customers, delivery to border parcel stations for self-collection/self-clearance is possible.

Fixed prices, no discounts

At IDEA-SysTec there are no hidden prices and no discounts or price reductions. Prices are calculated fairly and without a markup, so that all customers are treated equally. Standard solutions have a fixed price; everything else — custom-made items, longer supports, superstructures, installation proposals — is charged according to effort and material consumption and clarified in advance.

7 · Safety

Recommendations & safety

A few points you should absolutely pay attention to before ordering — straight from our own experience with faulty third-party systems and customer enquiries.

⚠ Caution with cheap telescopic rails

There are low-priced telescopic rails on which a lever can separate the inner from the outer rail. Caution is advised here: If the lever is pressed down all the way when pulling out, the entire drawer can be pulled out. IDEA-SysTec does not use such rails for safety reasons — nor rails that can only be secured with a latch on one side, because that is not sufficient for the actual load.

Measure in the lock catch

For pull-outs installed from both sides, be sure to subtract from the maximum internal dimension the inward-protruding storage compartment locks (lock catch) at 5–6 cm subtract. In addition, between two opposing pull-outs there should be 5 cm of space left. If there is too little room inside, it becomes difficult to slide the pull-out with its supports in over the storage compartment flap.

Floor angles: when 6 cm is needed

By default, the telescopic profile sits around 10 mm above the floor. If a loading edge has to be overcome, IDEA-SysTec also makes floor angles, for a surcharge, with up to 6 cm height made to measure (standard otherwise 1 cm clearance to the floor). Please also always observe the vehicle manufacturer’s installation guidelines.

What is NOT included in the scope of delivery

Floor pull-outs are supplied for the insertion of a phenolic plywood board — IDEA-SysTec does not supply the board and adhesive, nor the Euro-standard boxes themselves. Both are available more cheaply at the DIY store and survive transport without risk of damage. For the width calculation of a floor pull-out, add to the actual box width approx. 8 cm extra for telescopic rails, screws and angles.

Still have questions? We’ll do the maths.